|
|
 |
 |
 |
 |
SPECIFICATIONS:
* Output:4.8kw (Hi) 2.4kw (Lo)
* Voltage: 12V or 24V DC.
* Power consumption(L/H): (W) 45 (Hi) 25 (Lo)
* Fuel Consupmtion (L/H): 0.58 (Hi) 0.29 (Lo)
* Control Temperature: 75 - 80 C
* Weight: 4.5kg
* Dimensions: 274L x 175W x 195H (mm)
1. Description.
The Mikuni MX40 is a 4.8kw diesel fired water heater which is suitable for providing hot water for heating purposes via radiators or matrix heaters and also domestic hot water via a calorifier. The Mikuni MX40 is fully automatic in operation featuring glow plug ignition and microprocessor control for full temperature regulation. The heater will cycle automatically between 4.8kw and 2.4kw depending upon demand, this ensures that the MX40 is very economical in operation. Suitable for boats from 28ft to 40ft.
2. Marine Applications.
The Mikuni MX40 is supplied prewired on a stainless steel plate which is supported on anti – vibration mounts to prevent any resonance through the boat. The kit is complete with full wiring loom, thermostat and timer*, exhaust system c/w silencer, lagging and brass through hull fitting, fuel system with copper fuel line, shut off cock and tank standpipe. The water circulation pump is built into the heater body which has a spigot to accept 16mm rubber heater hose.
3. Installation.
The fitting kit that is supplied with the Marine version of the Mikuni MX40 heater has been designed to keep installation as simple and quick as possible. The electrics just require connecting to a 12/24 volt D.C. supply and then the cable routing for the optional timer/stat and on/off switch. All the necessary cables and fuses etc are supplied in the kit. The exhaust pipe is only 25mm diameter O.D. and is manufactured from convoluted flexible stainless steel which is then fitted with a heat resistant glass fibre sleeve. The exhaust pipe is taken by the most direct route to the flue terminal via the stainless steel silencer. The fuel system for the heater is 3/16th copper to comply with the current boat safety scheme and includes stop cock and all necessary compression fittings to complete the installation.
Kit Contents
4.8Kw Water Heater pre-mounted on stainless steel plate, water pump, 3.3 metres fuel pipe, 2 metres exhaust, s/s exhaust silencer, polished s/s exhaust terminal, switch panel, anti-vibration mounts and all clips
What You Get In The Box
ITEM DESCRIPTION QTY
1 Heater 1
2 Control box 1
3 Wiring looom 1
4 s/s mounting plate 1
5 Mounting brackets 4
6 On/off switch panel 1
7 3/16"" x 3/16"" Compression fittings 4
8 1/8"" - 1/4"" Compression fitting 1
9 1/8"" - 3/16"" Compression fitting 1
10 Electric fuel solenoid valve 1
11 22mm Exhaust with silencer 1
12 22mm Brass skin fitting 1
13 Exhaust lagging ( metre) 4
14 3/16"" Copper fuel line (Metre) 3.3
15 M6 AV Mounts 4
16 M6 Full nut 8
17 M6 Spring washer 8
18 Hose clip 4
19 22mm S/S Exhaust clamp 2
20 Screws and clips (bag) 1
21 Installation manual 1
|
 |
 |
 |
 |
|
)